It adopts the technique of automatic marking and high precision operation structure based on servo drive and raster detection positioning which can realize the high precision and automation of ink-jet marking. This equipment is consist of the host machine, conveyor belt, marking components, material receiving device,etc. It can finish the automatic vision alignment by HD CCD and generate the ink-jet track according to the marking parameters of the controller. And the track is composed of countless separated ink dots. The precision can reach 0.2mm and the ink consumption only depends on the area of the ink dots. There’s no need of the screen plate, of cleaning, changing the screen plate and proofreading. The whole process from ink-jet marking to substrates collecting is intelligent and automatic.
- Fast printing speed，1 piece per 4-6 seconds，Daily output：8000-10000pieces per 10 hours.
- Labor demand is small. Simple operation.1 worker can operate 5 machines at one time.
- No need screen plate .Avoid screen plate Making, Changing and Cleaning. Environment friendly.
- Self-R&DBKKYX XP.10 Intelligent Operating System.Easy study and operate.
- Imported High-Definition industrial camera.Low distortion, Wide spectrum, High uniform and High Precision.
- Super-speed automatic Positioning System narrows the precision of marking trajectory to 0.2mm with high yield, which is much better than artificial alignment.
- 220V electricity supply.No need industrial electricity.Plug and play.
- Ink-jet Area is as large as 400*400MM. Applicable to all kinds of planar ink jet.
- Small occupied space and low requirement for work environment.
- The anti-skid conveyor belt is Durable, Flexible. No Break, Open and Delaminating problem.
|Air Source Requirement||0.6Mpa Clear Air|
|Positioning System||HD CCD Camera + Visual AutoPositioning|
|Operating System||BKKYX XP.10|
|Positioning Speed||400mm/s / 800mm/s|
|Marking Speed||300mm/s / 600mm/s|
|Item||Intelligent Marking Line Print Machine||Manual Marking Line Print|
|LaborCost||1 worker||5 workers|
|Output||One worker operate 5 machines.Daily output:8000-10000 piecesper 10 hours per singlemachine.||Five workers,Daily output 7000–8000 pieces per 10 hours|
|Screen Plate||No need||Screen plate-making,Alignment,Cleaning.
The process is time-consuming.
|Ink onsumption||Calculated by actual printing area||Screen Printing.Link consumption is higher|
|Marking Precision||Stable.Precision up to 0.2mm.
High qualified rate.
|Depend on workers proficiency. Unstable.|
|Operation||Intelligent Interface.Simple to operate. Can set different printing parameters according to different products.||Repeat Manual printing|
|Environment-Friendly||Without screen plate.Avoid pollution for raw material and cleaning pollution.||Hard to control the usage of glue. Much pollution froml glue. Cleaning and Basking plate chemicals.|